Axis A22

Use all factory ballast along with 750s in each of the rear lockers and 400s on each side of the bow.

Centurion Enzo FX44

Use all factory ballast only and start surfing.

Malibu LSV 23

Use all factory ballast along with 900s in each of the rear lockers and 400s on each side of the bow and use the wedge.

Note: if you have additional factory ballast from the factory (plug & play) then you will not need to use the extra ballast in the front of the bow.

Malibu LSV 247

Use all factory ballast along with 1100s in each of the rear lockers and 400s on each side of the bow and use the wedge.

Note: if you have additional factory ballast from the factory (plug & play) then you will not need to use the extra ballast in the front of the bow.

Malibu VTX

Use all factory ballast along with 750s in each of the rear lockers and 400s on each side of the bow and use the wedge.

Note: if you have additional factory ballast from the factory (plug & play) then you will not need to use the extra ballast in the front of the bow.

Mastercraft XStar

Use all factory ballast along with at least 900s in each of the rear lockers and 400s on each side of the bow.

Mastercraft X2

Use all factory ballast along with 750s in each rear locker and 400 on each side.

Mastercraft X15

Use all factory ballast along with 750s in each rear locker and a 400lb sac behind driver and a 400lb sac underneath the glove box area.

Mastercraft X25

Use all factory ballast along with 900s in each rear locker and a 400lb sac behind driver and a 400lb sac underneath the glove box area.

Mastercraft X30

Use all factory ballast along with 900s in each rear locker and a 400lb sac behind driver and a 400lb sac underneath the glove box area.

Note: You would use the spacer provided in the kit to get the angle correct on this boat.

Mastercraft X 35

Use all factory ballast along with 1100s in each rear locker and a 400lb sac behind driver and a 400lb sac underneath the glove box area.

Mastercraft X45

Use all factory ballast along with 1100s in each of the rear lockers and 400s behind the driver and under the glove box area.

Note: You would use the spacer provided in the kit to get the angle correct on this boat.

Mastercraft X55

Use all factory ballast along with 1100s in each of the rear lockers and 400s behind the driver and under the glove box area.

MB Sports B52 21

Use all factory ballast along with 750s in each of the rear lockers.

MB Sports F22 Tomcat

Use all factory ballast along with 750s in each of the rear lockers.

MB Sports B52 23

Use all factory ballast along with 750s in each of the rear lockers.

MB Sports F24 Tomcat

Use all factory ballast along with 1100s in each of the rear lockers.

Moomba Outback

Use all factory ballast along with 800lbs (2 400lb sacs) in the rear ski locker and 400s on each side in the motor in the floor.

Nautique Air 210

Use all factory ballast along with 750s in each of the rear lockers and one 400lb sac in the floor in the bow.

Supra 21 Launch

Use all factory ballast along with 750s in each of the rear lockers and 400s on each side in the bow..

Supra 22 SSV

Use all factory ballast along with 750s in each of the rear lockers and 400s on each side in the bow..

Supreme v226

Use all factory ballast along with 900s in each of the rear lockers and 400s in each side on the bow.

Tige 22ve

Use all factory ballast along with 750s in each of the rear lockers and 400s on each side in the bow..

Tige 24ve

Use all factory ballast along with 1100s in each of the rear lockers and 400s on each side in the bow..

Please reload

Note: this is only a suggestion, weight changes everything so other factors are involved here. You might have to change the ballast depending on other circumstances involved.  Example: speed, people, whether or not your boat has a center tab or wedge, etc.

Boat Ballast Setup

© 2019 Go Surf Assist, LLC. All Rights Reserved. Patented USA.